<< May 2019 >>
Sun Mon Tue Wed Thu Fri Sat
 01 02 03 04
05 06 07 08 09 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30 31


If you want to be updated on this weblog Enter your email here:



rss feed



Wednesday, May 29, 2019
Here is the mbstartool.com engineer solution to Mb Star C3 V2018.9 up DAS Xentry multiplexer initialization failed problem. Error message: Initialization of diagnosis multiplexer failed. mb-star-c3-multiplexer-failed Possible causes: The link between

Here is the obd2tool.com engineer solution to Mb Star C3 V2018.9 up DAS Xentry multiplexer initialization failed problem.

Error message:

Initialization of diagnosis multiplexer failed.

mb-star-c3-multiplexer-failed

Possible causes:

The link between the diagnosis multiplexer and the diagnostic socket is interrupted.

The link between the diagnostic multiplexer and the diagnostic unit is interrupted.

The voltage supply at the diagnostic socket (circuit 30 and (or) circuit 31) is faulty.

Note:

When using SDconnect,check the connection status using the Toolkit.

Solution:

1. First check if you use the correct software for Star C3 not sd connect c4, you do not modify software by yourself and it passes self-test.

If all these are okay, replace the Config file in c:\program\mecredes-benz\config

Config file
https://mega.nz/#!vhFEXBiL!jeFN5y38eCEH3ZitnQ2lvOGKBn3hJTWb4KsZ70I537k

2.If still not work, check device and vehicle communication

3. Otherwise send your MB Star C3 and software back to repair.

Posted at 06:03 am by youobd2

 

Leave a Comment:

Name


Homepage (optional)


Comments




Previous Entry Home Next Entry