<< September 2019 >>
Sun Mon Tue Wed Thu Fri Sat
01 02 03 04 05 06 07
08 09 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
29 30


If you want to be updated on this weblog Enter your email here:



rss feed



Tuesday, September 17, 2019
MB SD C4 Tourismo bus communication error (fixed)

I bought the MB SD C4+Dell D630 Laptop pre-installed bundle, when I test it have the problem SD Connect C4 cannot power on when connected with  Tourismo bus, I contacted there customer service at obdii365.com, and here is the solution provided by their engineer.

I will explain my problem in detail:

” I have tried 2 different mb sd connect c4 on Tourismo buses and sd connect does not power on.In the meantime those MB SD Connect C4 works normally to any other MB Truck and car.also on Tourismo have check Mb Star C3 and works normally.”

You should check:

bus with OBD
pin 4 + 5
both must be connected and ground

In SDConnect “-” is 5 pin only. There is 4 contact not used in 16pin OBD connector.

“i’m getting an communication error when connecting xentry to a tourismo.”

Tourismo-bus-communication-error-1Tourismo-bus-communication-error-2Tourismo-bus-communication-error-3

A Communication error has occurred when access FPS system

Solution:

– turn OFF/ON BUS ground switch (our remove battery – cable). FPS1 wake up and MB Star diagnostic recognized FPS1/VIN code.

or

– enter the DAS ATEGO truck come and place manually and then it will work perfect

” Another problem is : “Currently the speed limit is set to 100 km/h. I’m trying to set it to higher value (with MB SD C4 DAS using modified EOL files). On the menu it tells me that I can, because there are higher values (105 km/h. 112 km/h, etc). But when I try to set the speed limit to higher than 100 km/h it doesn’t allow me to do it (can’t save the changes). When I try to set it below 100 km/h everything goes fine.”

I done the Access special settings , and it working perfect now!

Posted at 07:11 am by youobd2
Make a comment  

Saturday, August 31, 2019
SBB Pro2 Key Programmer immo car list

SBB PRO2 Key Programmer immo car list:
ACURA
CL&TL 99-03.
INTEGRA 00-01.
MDX 01-06.
MDX 07-09.
NSX 97-05.
RDX 07-16.
RL 96-04.
RSX 02-06.
TL 04-06.
TL 07-08.
TL 09-17.
TSX 04-06.
TSX 07-08.
TSX 09-17.
ALFA ROMEO
GT CAN 03-16.
147 CAN 00-17.
156 98-01.
156 01-03.
156 03-05.
156SPORT WAGO 00-01.
156SPORT WAGO 01-07.
166 98-04.
166 04-08.
AUDI
ALLROAD 00-04.
A2 00-04.
A3 96-97.
A3 97-04.
A4 95-96.
A4 96-97.
A4 97-04.
A6 95-96.
A6 96-97.
A6 97-04.
A8 95-96.
A8 97-04.
CABRIO 95-96.
CABRIO 96-97.
CABRIO 97-04.
Coupe 95-96.
Coupe 96-97.
Coupe 97-04.
Coupes2 95-96.
Coupes2 96-97.
Coupes2 97-04.
S3 01-04.
S4 00-05.
S6 95-96.
S6 96-97.
S6 97-04.
S8 97-04.
TT 98-04.
80 96-.
AUDI USA
A4 02-05.
A6 01-05.
A8 01-02.
S4 02-05.
S6 01-05.
TT COUPE 01-06.
BUICK BASIC
LESABRE 00-05.
PARK AVE. 97-04.
RENDEZVOUS 02-04.
BUICK[CAN]
ALLURE 05-09.
ENCLAVE 07-17.
GM TYPE7-CAN 10-17.
LACROSSE 05-09.
LUCERNE 06-17.
TERRAZA 05-07.
CADILLAC BASIC
CATERA 97-00.
CATERA 01-02.
CTS 03-07.
DEVILLE-STS 00-05.
SEVILLE 97-03.
CADILLAC[CAN]
CTS 08-17.
DTS 06-17.
ESCALADE 07-16.
SRX 04-06.
SRX 07-16.
CHEVROLET S.AMERICA
AGILE[CAN] 09-17.
ASTRA 01-17.
BLAZER 06-08.
BLAZER 08-17.
CAPTIVA[CAN] 08-17.
CELTA 00-16.
CORSA 95-98.
CORSA 98-99.
CORSA 00-17.
CORSA HATCH 00-.
MERIVA 02-.17
MONTANA 03-17.
OMEGA 95-98.
PRISMA 06-17
S-10 06-08.
S-10 08-.
VECTRA 05-.
VECTRA 09-.
ZAFIRA 99-00.
ZAFIRA 01-05.
CHEVROLETUS BASIC
venture 99-04.
CHEVROLET US CAN
AVALANCHE 07-16.
COBALT 05-10.
EQUINOX 07-09.
EXPRESS 08-17.
HHR 06-13.
IMPALA 06-13.
MALIBU 04-17.
M.TE CARLO 06-08.
SILVERADO 07-17
SUBURBAN 07-17.
TAHOE 07-16.
TRAVERSE 09-17
UPLANDER 05-08.
CHEVROLET-DAEWOO
ESPERO 95-97.
EVANDA 03-17.
KALOS 02-06.
LACETTI 04-09.
LANOS 97-02.
LANOS 02-04.
LEGANZA 97-00.
LEGANZA 00-02.
LEGANZA 02-17.
LEGANZA[USA] 01-17.
MATIZ 98-00.
MATIZ 01-05.
MATIZ 06-17.
NEXIA 95-97.
NUBIRA 97-00.
NUBIRA 00-02.
NUBIRA 03-06.
TACUMA 00-02.
TACUMA 02-08.
CHRYSLER
ASPEN[CAN 07-09.
CIRRUS 99-00.
CIRRUS SONV. 01-02.
CIRRUS SEDAN 01-02.
CONCORDE 98-04.
LHS 99-04.
NEON 00-05.
NEW YORKER 99-04.
PACIFICA 04-08.
PT CRUISER 01-05.
PT CRUISER LE 01-05.
PT CRUISER[CAN 06-17.
SEBRING C. 01-06.
SEBRING C[CAN] 07-17.
SEBRING 2 DR. 01-05.
SEBRING 2 DR. 99-06.
SEBRING[CAN] 07-11.
SEBRIGN[CCD] 98-02.
STRATUS 2 DR. 01-05.
STRATUS 4 DR. 99-06.
STRATUS[CCD] 98-01.
wown&co[byp 08-17
TOWN&COUNTRY 01-03.
TOWN&COUNTRY 04-07.
TOWN&COUN[CAN] 08-09.
TOWN&COUN[CAN] 10-17.
VISION 98-02.
VOYAGER 00-03.
VOYAGER 04-06.
VOYAGER[CCD] 98-01.
200[CAN] 11-17
300 99-04.
300CAN 05-06.
300CAN 06-08.
300CAN 08-09.
300CAN 09-11.
300[KGO] 12-17.
CITROEN
BERLINGO 01-02.
BERLINGO SB 98-01.
BERLINGO SV 98-01.
C2 03-05.
C2[CAN] 06-17.
C3 02-05.
C3[CAN] 06-17.
C4 06-17
C5 01-05.
C5[CAN] 06-08.
C6[CAN] 06-17.
C8 02-05.
C8[CAN] 05-17.
EVASION[SB] 98-02.
EVASION[SC] 98-02.
JUMPY[SC] 99-02.
JUMPY[SV] 99-02.
SAXO 98-00.
SAXO 00-03.
XANTIA 98-99.
XANTIA SB 99-01.
XANTIA SC 99-01.
XSARAPICASSO 00-06.
XSARA SB 98-01.
XSARA SB 01-06.
XSARA SC 98-01.
XSARA SC 01-06.
DODGE
AVENGER CAN 08-17.
CALIBER CAN 07-17.
CARAVAN 01-03.
CARAVAN 04-07.
CARAVAN BYP 08-17.
CARAVAN CAN 08-09.
CARAVAN CAN 10-17.
CHALLENGE CAN 08-17.
CHALLENGE KGO 12-17.
CHARGER CAN 05-06.
CHARGER CAN 06-08.
CHARGER CAN 08-09.
CHARGER CAN 09-17.
CHARGER KGO 12-.
DAKOTA 01-02.
DAKOTA 03-04.
DAKOTA CAN 05-06.
DAKOTA CAN 07-17.
DURANGO 01-03.
DURANGO 03-04.
DURANGO CAN 04-06.
DURANGO CAN 07-09.
DURANGO CAN 11-.
INTREPID 98-04.
INTREPID ES 01-02.
INTREPID SED. 01-02.
JOURNEY BYP 08-17.
JOURNEY CAN 08-10.
JOURNEY CAN 10-17.
JOURNEY KGO 12-17.
MAGNUM CAN 05-06.
MAGNUM CAN 07-08.
MAGNUM CAN 08-09.
MAGNUM CAN 09-17.
NEON 00-05.
NITRO CAN 07-17.
RAM 02-05.
RAM CAN 06-11.
RAM CAN 09-17.
STRATUS 2 DR. 01-05.
STRATUS 4 DR. 99-06.
STRATUS CCD 98-01.
EAGLE
VISION 98-
FIAT
DAILY[CAN 00-.
DOBLO CAN 00-06.
DUCATO 02-05.
IDEA CAN 03-08.
MULTIPLA 98-03.
PALIO CAN 02-.
PANDA CAN 02-.
PUNTO CAN 99-.
SEDICI D 06-.
SEDICI G 06-17.
SEICENTO 00-10.
SIENA CAN 02-07.
SITLO CAN 01-07.
ULYSSE BSI 02-05.
ULYSSE CAN 05-11.
500 CAN 07-.
FIAT SIAMERICA
DOBLO CAN 00-06.
DOBLO CAN 06-.
IDEA CAN 03-08.
IDEA CAN 09-.
MILLE 05-.
PALIO CAN 04-08.
PALIO CAN 09-.
PUNTO CAN 99-07.
PUNTO CAN 07-.
SIENA ARG 09-17.
SIENA BRA 09-17.
SIENA CAN 02-07.
STILO CAN 02-08.
STILO CAN 09-.
STRADA CAN 05-.
FIAT-PSA
PHEDRA BSI 02-05.
PHEDRA CAN 05-11.
SCUDO SC 96-01.
SCUDO SV 96-01.
ULYSSE BSI 02-05.
ULYSSE CAN 05-17.
FORD AUS
B-SERIES PCM 01-04.
B-SERIES P2 99-01.
ESCAPE CAN 05-.
ESCAPE PCM 01-04.
EXPLORER CAN 04-.
EXPLORER PCM 01-03.
EXPLORER P2 98-00.
EXPL.STRA PCM 02-05.
EXPL.STRAC P2 99-01.
FOCUS CAN 03-04.
FOCUS CAN 05-.
FOCUS PCM 00-04.
S-TYPE 02-.
TAURUS CAN 04-.
TAURUS PCM 00-03.
TAURUS P1 96-97.
TAURUS P2 98-99.
TRIBUTE PCM 01-03.
121 96-01.
FORD EU
COUGAR 97-02.
COURIER 97-02.
COURIER 2KD 97-99.
ESCORT 95-96.
ESCORT MK 96-97.
ESCORT MKB 96-97.
ESCORT MKD 96-97.
FIESTA 95-96.
FIESTA 00-02.
FIESTA MK 96-97.
FIESTA MKB 96-97.
FIESTA MKD 96-97.
FIESTA 2K 97-00.
FIESTA 2KD 97-00.
FIESTA 3KD 97-00.
FOCUS 98-02.
galaxy1.9 98-00.
galaxy1.9 00-03.
galaxy 2.3 2K 98-00.
galaxy 2.3 2K 00-02.
GALAXY MKB 96-97.
GALAXY MKB 96-97.
KA 96-02.
KA MK 96-97.
KA MKB 96-97.
MONDEO 95-96.
MONDEO 01-02.
MONDEO MK 96-97.
MONDEO mkb 96-97.
MONDEO mkd 96-97.
MONDEO 2K 97-00.
MONDEO 2KD 97-00.
MONDEO 3KD 97-00.
PUMA 98-02.
SCORPIO 2K 97-00.
S-TYPE 00-02.
transit 95-96.
transit 00-02.
transit mk 96-97.
transit mkb 96-97.
tramsit mkd 96-97.
transit 2k 97-99.
transit 2kd 97-99.
transit 3kd 97-99.
FORD SUD AMERICA
ECO SPORT CAN 03-07.
ESCORT 98-02.
EXPLORER USA 04-17.
FIESTA MA CAN 05-17.
FIESTA  CAN 03-17.
FOCUS 98-07.
FOCUS CAN 08-17.
F-100 00-05.
KA CAN 08-17.
FORD USA
FORD USA
CONTOUR V PCM 99-00.
CONTOUR P1 97-99.
CROWN VIC CAN 05-06.
CROWN VIC CAN 07-17
CROWN VIC PCM 03-04.
CROWN VIC P2 98-02.
EDGE CAN 07-09.
EDGE CAN 10-10.
EDGE CAN 11-17.
ESCAPE CAN 05-07.
ESCAPE CAN 08-09.
ESCAPE CAN 10-17.
ESCAPE PCM 01-04.
E-SERIES CAN 08-09.
E-SERIES CAN 10-17.
excursion P2 00-05.
EXPEDITIO CAN 05-06.
EXPEDITIO CAN 07-08.
EXPEDITIO CAN 09-17.
EXPEDITIO HEC 99-02.
EXPEDITIO PCM 03-04.
EXPEDITIO P1 97-98.

Posted at 01:01 am by youobd2
Make a comment  

Tuesday, August 20, 2019
V2019 Super DSP3 DSPIII OBD Odometer Correction Tool For New Models 2010-2019 Years Via OBD2 Support more cars than DSPIII

V2019 Super DSP3 vs. SPIII DSP3 Odometer Correction Tool Support MQB platform model: V2019 DSP III adds following odometer correction models: MASERATI / QUARTOPORTE-95160 DIAG    by OBD2 MASERATI / GHIBLI-95160 DIAG    by OBD2 MASERATI / LEVANTE-95320 DIAG    by OBD2   ODOMETER: VW/GOLF SPORTSVAN 06.2014- NEC35XX DIAG    by OBD2 VW/GOLF MK7 06.2014- NEC35XX DIAG    by OBD2 VW/PASSAT B8 06.2014- NEC35XX DIAG    by OBD2 VW/POLO 06.2014- NEC35XX DIAG    by OBD2 VW/TIGUAN 06.2014- NEC35XX DIAG    by OBD2 VW/TOURAN 06.2014- NEC35XX DIAG    by OBD2 AUDI/A3 06.2014- NEC35XX DIAG    by OBD2 AUDI/Q2 06.2014- NEC35XX DIAG    by OBD2 SKODA/FABIA 06.2014- NEC35XX DIAG    by OBD2 SKODA/RAPID 06.2014- NEC35XX DIAG    by OBD2 SKODA/OCTAVIA 06.2014- NEC35XX DIAG    by OBD2 SKODA/SUPERB 06.2014- NEC35XX DIAG    by OBD2 SEAT/IBIZA 06.2014- NEC35XX DIAG    by OBD2 SEAT/TOLEDO 06.2014- NEC35XX DIAG    by OBD2 SEAT/LEON 06.2014- NEC35XX DIAG    by OBD2   ATTENTION:The above new updates are for car models with platform MQBAB-(Continental/VDO) from 6/2014.   DSP3 DSP3 +(model supported by DSPIII) fully supports Audi/VW/Skoda/SEAT/Bentley/Benz/Land Rover/Jaguar/Volvo/ Porsche 2010-2017 models, as follows: 1 2 3 4 5 6 7 8 9 10 11 12

Posted at 03:16 am by youobd2
Make a comment  

Thursday, August 01, 2019
How to use VAG OBD helper Work with Lonsdor k518ise/k518s to program VAG 4th key

1. How to use Lonsdor K518ISE to program key with the IMMO data?

Step 1. Connect Lonsdor K518ISE and computer using one USB cable, open “My Computer”, click on the portable device “K518”.

Step 2.Click on “Memory Device”.

Step 3.Rick click to open the folder “Customfile”, copy the VAG 4th IMMO data or MQB IMMO data, paste it into this folder.

Step 4.Enter K518 function menu, select “Immobilizer”, then ” 4th IMMO”.

Step 5.Select “4th engineering mode”.

Step 6.Select “Generate dealer key”.

Step 7.Select “Yes” to ensure the immo data(bin file) is put into the customfile folder of k518.

 

2. How to use VAG OBD Helper Cable to get IMMO Data via OBD-obd2tool.com:

VAG OBD helper can help online read out the VAG 4th IMMO data, so that you can go on using the key programmer ((i.e: VVDI2, AVDI, APPRO, Lonsdor K518 etc) to program key whatever adding new key or when all keys lost.

Incl. NEC24C32, NEC24C64, NEC35XX, Johnson MQB, A4, Q5 BCM

Posted at 05:12 am by youobd2
Make a comment  

Wednesday, July 24, 2019
How does CGDI BMW diagnose BMW 3 series E93 successfully

Confirmed: CGDI BMW adds “BMW diagnosis” to be able to program and code BMW E series; able to read/clear trouble codes for BMW E series, F series, G series.

How to update CGDI BMW diagnosis function for free:

As long as you have any of CG100 or CG Pro or CGDI MB, please provide the serial number for free trial.

For BMW diagnosis: CGDI BMW VS BMW ICOM

1.Easy to use. As long as you are qualified with corresponding vehicle maintenance knowledge, CGDI BMW does not have high requirements for the user’s professional skills and English level.

2.Cheap. CGDI BMW is cheaper than BMW ICOM (clone and original).

BMW ICOM clone & original are able to diagnose, program and code BMW E-series models at higher price (clone: about 400eur).

Besides, BMW ICOM has some requirements for the user’s operating skills during installation, therefore some users will choose a hard disk with pre-installed software and be charged.

3.Menu-driven & automatic operation instead of manual operation, which save much time.

How does CGDI BMW diagnose BMW 3 series E93 successfully?

1.Select “BMW diagnosis”.

How-does-CGDI-BMW-diagnose-BMW-3-series-E93-1

2.It pops up “Whether to scan vehicle quickly”.

Press “Yes” and CGDI BMW will scan the BMW in 30 seconds.

Press “No” and CGDI BMW will scan the BMW all systems and take about 3 minutes.

How-does-CGDI-BMW-diagnose-BMW-3-series-E93-2

3.After selecting “No”.

How-does-CGDI-BMW-diagnose-BMW-3-series-E93-3

How-does-CGDI-BMW-diagnose-BMW-3-series-E93-4

4.It pops up the BMW information.

Have diagnosis options :

Read fault codes, clear fault codes, Clear all codes, Help, back.

It is menu-driven operation, easy to use.

At the left corner, you will see the working status.

How-does-CGDI-BMW-diagnose-BMW-3-series-E93-5
How-does-CGDI-BMW-diagnose-BMW-3-series-E93-6How-does-CGDI-BMW-diagnose-BMW-3-series-E93-7 How-does-CGDI-BMW-diagnose-BMW-3-series-E93-8

5.Back to select “BMW diagnosis”, then “scan vehicle quickly”.

And you will see all trouble codes are cleared, and all are normal.
How-does-CGDI-BMW-diagnose-BMW-3-series-E93-9
How-does-CGDI-BMW-diagnose-BMW-3-series-E93-10

Don’t you think it is easy to use CGDI BMW Prog for diagnosis?

Posted at 12:58 am by youobd2
Make a comment  

Tuesday, July 23, 2019
Honda Accord V6 2007 all keys lost HDS HIM made new keys!

Honda Accord V6 2007 have lost all keys. Possible to use Honda HDS to program new keys?

Answer:

Yes. You can make new keys to Accord with HDS if you have a decent HIM diagnostic tool.

Here is the test report: HIM HDS working for Accord 2007 all keys lost

Connect Honda HIM interface to your vehicle by OBD.

Run the Honda HDS software and enter “System Selection Menu”

Select “IMMOBI”

Note: Not all system may be available on this vehicle.

Refer to the Service Manual for further information
HDS-HIM-made-new-keys-on-Honda-Accord-V6-2007-1

Keep ignition ON until the tester directs you to turn the ignition off.

Press [Enter] to continue

HDS-HIM-made-new-keys-on-Honda-Accord-V6-2007-2

The tester cannot program keys with T5 stamped on the blade of the key or with the word ILCO on the plastic head.

The keys can only be programmed with the ILCO key duplicator.

Press[Enter] to continue

HDS-HIM-made-new-keys-on-Honda-Accord-V6-2007-3

Determining immobilizer system type. Please wait.

HDS-HIM-made-new-keys-on-Honda-Accord-V6-2007-4

Select “Immobilizer Setup”

IMPORTANT:

For vehicle equipped with keyless Access System, use the actual immobilizer key in the remote to register and diagnose the system

HDS-HIM-made-new-keys-on-Honda-Accord-V6-2007-5

Then you will see there are 5 options as below picture:

Before programming new keys, you would better to check the number of key.

Select “System Check, Number of Keys and Status Log ”à” Number Of Keys”
HDS-HIM-made-new-keys-on-Honda-Accord-V6-2007-6
HDS-HIM-made-new-keys-on-Honda-Accord-V6-2007-7

It show there is 1 key registered
HDS-HIM-made-new-keys-on-Honda-Accord-V6-2007-8

Then Exit the selection and select “Add and Delete Keys”

This function does the necessary registration for registering new keys or deleting registered keys

HDS-HIM-made-new-keys-on-Honda-Accord-V6-2007-9

Select “All Key Lost”

HDS-HIM-made-new-keys-on-Honda-Accord-V6-2007-10

It prompt “Obtain PCM-code(IMMOBILIZER PCM CODE) for In

This vehicle’s VIN will be required to obtain the password”

Look here: methods to get immo pin code:
1.Inquire dealer to get immo pin code via VIN

2.Disassemble immo box or smart box to read out the pin code by programmer

3.Read out immo pin code by auto key programmer

Read out PIN Code from immo/smart box.

The pin code is stored in the chip located in ECU,immo box,smart box or BCM box,it depend on the vehicle models.You need to remove chip from PCB,then use programmer to read out the pin code,the accuracy up to 99%.This method require you have skillful operations:disassembling,welding,reading out pin code.

Read out PIN code by auto key programmer:

Many devices can calculate the pin code by their programmer,you just need to plug the programmer into OBD socket to get pin code,then programming keys.

Try to disassemble chip to read out pin code when you find the device can not support.

In summary, when you get incorrect PIN code by VIN calculating:

1.Check difference between the appearance VIN and immo system VIN.

If you they are different,the immo system VIN is more reliable.

2.Make sure vehicle models is corresponding to the immo system.(many freshman select incorrect models)

3.Immo system have been locked due to much time incorrect pin code enter(wait for hours or next day,try it again!)

Inquire PIN Code by Dealer or Three-part via VIN.

Because the VIN(Vehicle Identify Number) of each car is unique identification. It will cost you $20~100 depend on your vehicle models, the accuracy rate is more than 95%.The advantage is that you do not need to disassemble any parts on the vehicle.After getting the PIN code, you are available to program keys directly.

Personally, if the problem can be solved by paying a little,you would better to, it will save you much time.

But sometimes, your customers unwilling to spend extra money or you got the incorrect PIN code by VIN, so you need to try other methods.

HDS-HIM-made-new-keys-on-Honda-Accord-V6-2007-11

Enter PCM-Code

HDS-HIM-made-new-keys-on-Honda-Accord-V6-2007-12

After input the PCM code, it prompt you to enter the key number you want to register.

Here enter “1”
HDS-HIM-made-new-keys-on-Honda-Accord-V6-2007-13

Then follow the Honda HDS guides:

Turn the ignition switch off

HDS-HIM-made-new-keys-on-Honda-Accord-V6-2007-14

Then turn the ignition switch on

HDS-HIM-made-new-keys-on-Honda-Accord-V6-2007-15

Turn the ignition switch off within 16 seconds

HDS-HIM-made-new-keys-on-Honda-Accord-V6-2007-16

Turn the ignition switch to on within 20 seconds, without changing the key

HDS-HIM-made-new-keys-on-Honda-Accord-V6-2007-17

Turn the ignition switch off

Then turn the ignition switch on

It prompt that “Is the immobilizer indicator light turned off?”

Click “Yes” to continue

HDS-HIM-made-new-keys-on-Honda-Accord-V6-2007-18
Turn the ignition switch off

Turn the ignition switch on

Turn the ignition switch off

Turn the ignition switch on again

The registration of keys has been completed.

Turn the ignition switch off

HDS-HIM-made-new-keys-on-Honda-Accord-V6-2007-19

Check All Keys to ensure each will start the engine

HDS-HIM-made-new-keys-on-Honda-Accord-V6-2007-20

Done!

Posted at 06:46 am by youobd2
Make a comment  

Saturday, June 29, 2019
How to install WIS 102015 for SD Connect C4

This is the instruction on how to install Workshop Information System V2015.10 for 2015.09 mercedes star diagnostic mb sd connect c4 multiplexer. Free download MB WIS ASRA 10/2015 FULL Torrent: https://www.dropbox.com/s/bwotrms6vi7o3vg/WIS_1015.zip?dl=0 Version: 3.11.12.0 Language: Multilingual Crack: None Description: Mercedes-Benz WIS / ASRA Information Base repair of cars and trucks, Mercedes-Benz buses for the European and American markets. Extras. Info.: This is a full release, suitable for installation “from scratch.” WIS installation instruction: Install Admin Tool Select start 2015-WIS-installation-1   (1) Internet Explorer prompt: select Yes. Select Start registration. 2015-WIS-installation-2 Select Run at the bottom prompt. Select Run at the bottom prompt. Installing … Select a language and click OK. Click Next. Click Next. Installing EWA… 2015-WIS-installation-3 Click Next. Finished installing EWA Admin Tool, and click Finish. Check WIS Startkey Select Startkey and copy NAC address to ID in HP-EVA Keygen interface. 2015-WIS-installation-4 Set the Expiration dates. Copy EPCnet to its Startkey, and WISnet to its Startkey. 2015-WIS-installation-5 Close HP-EVA Keygen interface. Click Save in EWA Admin Tool. Startkey successfully saved. Click Exit. Install WIS database Select WIS and click Install WIS database. 2015-WIS-installation-6 Prompt: WIS installation 1 check WIS Startkey 2 check WIS information medium 3 copy all WIS files to hard disk 4 install new EWA software version (optional) 5 test new WIS database 6 install new WIS database 7 carry out correction of work steps 8 set up latest WIS documents 2015-WIS-installation-7 Installing WIS database… Click Continue. Click Continue. Click Confirm. Click Continue. Click Continue. Click Continue. WIS database installation completes. Click Exit. Select Yes to exit Admin Tool. Set up EWA Select Favorites>>EWA net>>EWA net. 2015-WIS-installation-8 Enter User and Password (admin, admin) to Log in. Change password and click OK. Select Workshop. Workshop: 123 Country: U.S.A.(705) Click Save. 2015-WIS-installation-9 Select Group>>Administrator group. 2015-WIS-installation-10 Select EPC access authorization: As workshop access authorization Select WIS/ASRA access authorization: As workshop access authorization Click Save. 2015-WIS-installation-11 Click OK. Run EWA Again, select Favorites>>EWA net>>EWA net. Log in with new password. Click WIS/ASRA. 2015-WIS-installation-12 Close the interface of “ WIS/ASRA-what’s new…” 2015-WIS-installation-13 WIS diagnostic interface… 2015-WIS-installation-14 (note: Mercedes software 2019.07 for MB SD C4 at obd2tool comes with pre-installed WIS, no need to install yourself)

Posted at 04:10 am by youobd2
Make a comment  

Sunday, June 23, 2019
Ford EcoSport Smart Key Program Autel vs Obdstar vs XTool

What for Ford EcoSport smart key programming?

AutelOBDSTARXTOOL– which can make it?

Here are the tests:

Autel IM100: Failed!
OBDSTAR X300 PRO3: Success!
OBDSTAR X100 Pro: Success!
XTool X100 Pad 2: Success!

Test 1: Autel Im100 failed to program Ford EcoSport smart key
autel-im100-Ford-EcoSport-Smart-Key-1 autel-im100-Ford-EcoSport-Smart-Key-2

autel-im100-Ford-EcoSport-Smart-Key-3 autel-im100-Ford-EcoSport-Smart-Key-4 autel-im100-Ford-EcoSport-Smart-Key-5 autel-im100-Ford-EcoSport-Smart-Key-6 autel-im100-Ford-EcoSport-Smart-Key-7
Security access failed!
It’s 2014 Ford EcoSport
On a side note, IM100 now is Autel MaxiIM IM508

Test 2: Obdstar X300 Pro3 can make a Ford EcoSport smart key

obdstar-key-master-Ford-EcoSport-Smart-Key
Get solution with x300.
Raoul Engoule Raoul tested it! It’s 2014 Ford EcoSport

Test 3: Obdstar X100 Pro has no problem with Ford EcoSport smart key program
obdstar-x100pro-Ford-EcoSport-Smart-Key-1 obdstar-x100pro-Ford-EcoSport-Smart-Key-2 obdstar-x100pro-Ford-EcoSport-Smart-Key-3 obdstar-x100pro-Ford-EcoSport-Smart-Key-4
obdstar-x100pro-Ford-EcoSport-Smart-Key-5
obdstar-x100pro-Ford-EcoSport-Smart-Key-6
obdstar-x100pro-Ford-EcoSport-Smart-Key-7
obdstar-x100pro-Ford-EcoSport-Smart-Key-8
obdstar-x100pro-Ford-EcoSport-Smart-Key-9
obdstar-x100pro-Ford-EcoSport-Smart-Key-10
obdstar-x100pro-Ford-EcoSport-Smart-Key-11
obdstar-x100pro-Ford-EcoSport-Smart-Key-12
obdstar-x100pro-Ford-EcoSport-Smart-Key-14
obdstar-x100pro-Ford-EcoSport-Smart-Key-15

Done! It’s Ford EcoSport all keys lost
Note: you should have a pin code calculator like FMPC001 Ford incode calculator or VPC-100 for security codes.
X100 pro cannot get the code itself.

Test 4: Xtool X100 Pad2 can read security codes & add smart EcoSport keys

xtool-x100-pad2-Ford-ecosport-1
xtool-x100-pad2-Ford-ecosport-2
xtool-x100-pad2-Ford-ecosport-3
xtool-x100-pad2-Ford-ecosport-4
xtool-x100-pad2-Ford-ecosport-5
xtool-x100-pad2-Ford-ecosport-6
xtool-x100-pad2-Ford-ecosport-7
xtool-x100-pad2-Ford-ecosport-8
xtool-x100-pad2-Ford-ecosport-9
xtool-x100-pad2-Ford-ecosport-10

Success! X100 Pad2 can read security codes and add smart keys…all done on its own!

Conclusion:
For Ford EcoSport smart key program, you’d better have an Obdstar key master X300 pro3 or Xtool pad2.
Both can read PIN and program a smart key.
With Obdstar X100 Pro, you must have another tool for security codes read. Besides, it stopped production.
With Autel IM100 (IM508), you need luck! it’s good for auto diagnostic tests and key programming to some cars.

Posted at 02:20 am by youobd2
Make a comment  

Sunday, June 16, 2019
How to change language and update Autel Scanner

1.First of all,  the language of the Android Tablet need to change from Spanish to English.
Double check System setting —- language —-English

How-to-change-language-and-update-Autel-Scanner-1

2.The language of Diagnostic need to change.
To change the language from Spanish to English.

Step 1: Click at Maxisys.

How-to-change-language-and-update-Autel-Scanner-2

Step 2: Click at “Settings”.
How-to-change-language-and-update-Autel-Scanner-3

Step 3: Click at “ Language”

How-to-change-language-and-update-Autel-Scanner-4

Step 4: Select “ English”

How-to-change-language-and-update-Autel-Scanner-5

Then you can see that the language is in English now.

How-to-change-language-and-update-Autel-Scanner-6

After changing language to English and if you found it is blank here(Maxisys—Diagnostic).

Please go to Update and select vehicles software and reload them.

How-to-change-language-and-update-Autel-Scanner-7
How-to-change-language-and-update-Autel-Scanner-8
How-to-change-language-and-update-Autel-Scanner-9

 

the video of How to change language and update Autel Maxisys

 

 

Posted at 03:45 am by youobd2
Make a comment  

Thursday, June 06, 2019
CGDI MB Program New Keys for Old Benz W202 W208 W210 by OBD 1997-1998

In this CGDI MB Prog programmer instruction, OBD2TOOL will show you how to use CGDI MB programmer to add new keys for old Mercedes Benz W202 W208 W210 kline 38 pin car from 1997-1998. Procedures: Step 1:Calculate Password Connect CGDI MB Programmer to vehicle and your laptop,then run CGDI MB software. CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-1 Select [EIS] menu,then click [Read EIS Data] CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-2 Go to [Compute Password] menu,then [Copy key with key][–>Collect Data] CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-3 Select key type:Other keys,click [OK] to continue CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-4 CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-5 Please insert the key into EIS and click [OK] to continue CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-6 This is a -Kline EIS,the operation is different from the ordinary EIS,please follow the prompts to operate,to prevent the code! CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-7 Please insert the key into the CGDI MB device and click [OK] to continue CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-8 Wait until it prompt you to insert the key into EIS and click [OK] CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-9 It will ask you to wait several seconds CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-10 Then prompt you to make sure the key to the ON position and light the instrument?If you can’t,please pull out the key and try again,until you can normally twist and light the instrument and then click [OK] CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-11CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-12 Please insert the key into the CGDI MB device and click OK CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-13 CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-14 Now you need to insert the key into ESI again,then click [OK] CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-15 CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-16 Perform it again,click OK CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-17 Insert the key into the MB Key Programmer,then click [OK] to continue If it prompt yo with same operation instruction,just follow it. CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-18 Insert the car key into the EIS 10s and dial out CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-19 Please insert the key into the EIS again and click OK CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-20 Pull out the key for 5 seconds,then insert the EIS,then click OK CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-21 Please insert the key into the CGDI MB Benz device again and click [OK] CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-22 Please pull the key out and then insert intot he EIS!The following operation may be repeated several times. CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-23 Please pull out the key CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-24 Please insert the key into the EIS again and click OK …. CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-25 Now save the generated files CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-26 Save the file successfully,please upload the data to calculate PASSWORD CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-27 Click [Upload Data],then upload the file you saved just now CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-28 Upload data successfully,please click the [Query Result] button to query. CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-29 Click [Query Result],it will take you several minute to query result CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-30 Computing success!Click [OK] to continue CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-31 Here we get password,click [Copy] button,then select [EIS] menu CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-32 CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-33 Click [Paste] button to paste password,then click [Save EIS Data] Step 2:Generate Key File CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-34 CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-35 After saving EIS data successfully,select [Generate EE] menu Select key file format “V051”,then click [Load EIS File] you saved just now CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-36 Click [Generate Key File] CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-37 Now,save the key file generated Step 3:Program New Key CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-38 Insert the new key into CGDI MB device Select [Read/Write Key] menu,then click [Read Key/Chip] button CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-39 Click [Open/Write] And it prompt you to choose key type format:41 format and 51 format,click [OK] to continue CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-40 Select a key file to write CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-41 Write success!Click [OK] to continue CGDI-MB-Program-New-Keys-for-Old-Benz-W202-W208-W210-42 Test new key on vehicle,it can light instrument and start the engine! Done!

Posted at 11:38 pm by youobd2
Make a comment  

Next Page